Mu-Mix Additive™ fortifies asphalt sealer so that it will last up to 10x longer and helps seal cracks in the asphalt.  Mu-Mix Additive™ was tested and approved by the FAA for airport pavements.

Instead of resealing every year or two, Mu-Mix Additive is engineered to strengthen and harden your sealer so it lasts many times longer, protecting your pavement investment and saving thousands in long-term maintenance.

WHY MU-MIX LASTS LONGER

Standard driveway sealers fail because:

• Sunlight dries out the binder
• Gasoline and oil soften the surface
• Water penetrates and accelerates cracking
• Traffic wear erodes the coating
   

Mu-Mix Additive upgrades your sealer by:

• Increasing viscosity and sand suspension
• Strengthening the cured sealcoat matrix
• Improving resistance to fuel, oil, and de-icing chemicals
• Producing a harder, more durable surface
•  Maintaining flexibility to prevent cracking

The result is a sealcoat system designed to last up to 10× longer than conventional residential products under comparable conditions.

Mu-Mix technology was developed for extreme environments—fuel-soaked aircraft aprons, heavy-load runways, and commercial pavements—where failure is not an option.

That same technology is now available for:

• Residential driveways 
• Commercial parking lots 
• Fueling areas 
• Industrial yards 
• Airport runways and taxiways
   

Homeowner-simple application.  Airport-grade performance.

Mu-Mix systems conform to FAA Item P-628, the Federal Aviation Administration specification for rubberized coal-tar emulsion pavement preservation systems used to:

• Restore aged asphalt
•  Resist jet fuel, gasoline, and oil
• Improve skid resistance 
• Seal cracks and voids 
• Extend pavement service life under heavy traffic
   

This is not a cosmetic coating.  It is infrastructure-grade pavement protection.

Mu-Mix Additive
Sanford, North Carolina
Email: sales@mu-mix.com